摘 要：壓力傳感器的輸出特性受溫度影響很大，把任意溫度下傳感器的特性都標定出來是不可能的，可以用數據擬合的方法在已測定溫度特性曲線的基礎上得到所需溫度的壓力傳感器輸出特性。本文提出一種采用分段擬合的方法對壓力傳感器數據進行擬合，通過在實際中的應用證明，這種方法可以顯著提高擬合數據的精確性和簡便性。 關鍵詞：壓力傳感器;曲線擬合;分段擬合 [b][align=center]A Method To Improve Curve Fitting Characteristic For Pressure Sensors Ma junshuang Li zhendong Wang wei[/align][/b] Abstract: Because the output characteristic of pressure sensors is affected greatly by temperature and it is impossible to calibrate all curves at different temperature, data fitting is bringed forth to generate the curve for pressure sensors at any demanded temerature based on the data having been calibrated. A method using paragraph fitting to fit the data of pressure sensors is presented here. According to the result of experiment, this method can increase the accuracy of the fitting data and make the fitting process more convenient. Key words: pressure sensors;curve fitting; paragraph fitting 0 引言 　　壓力傳感器的輸出特性大都為非線性，且常受到各種環境因素的影響，其中主要為溫度影響因素。由于溫度的影響，壓力傳感器經常會發生零點偏移，為了提高測量的精度，壓力傳感器必須定時在標準溫度下測定傳感器的特性，予以標定。標定過程選取的壓力溫度點越多，標定精度越高，但標定時間也會越長。為減少標定時間，同時提高測量的精度，利用計算機對所測數據進行擬合的辦法越來越多的被采用。本文提出一種采用分段法進行數據擬合的方法，這種方法可以加快數據擬合的時間并提高擬合的精度。 　　詳情請點擊：一種改善壓力傳感器曲線擬合特性的方法