百通——世界領先的有線信號傳輸解決方案和無線網絡以及無線廣播、工業、樓宇及居住市場的領導者，宣布推出其用于無線局域網的BWRE-100 以太網供電距離擴展器。設計用于線型安裝和無縫整合，新PoE距離擴展器可以在很大程度上提高傳輸距離，并為用戶提供成本節約型設計，優化的靈活性和易執行性。 當應用百通無線解決方案時，利用擴展器上的雙向輸入輸出插口，PoE距離擴展器就能在無線開關和接入點間注入一個重新通電的信號。由此，用戶可利用5e、Cat6或是10G電纜，在距無線開關200米的地方安裝接入點，有效地加倍PoE的傳輸距離。此產品還可被用作一個單獨的PoE裝置，對來自系統PoE注射器的距離進行擴展，或是不用利用外部電力供應，對標準PoE裝置進行供電。 百通新PoE擴展器對百通無線解決方案進行的適當?shù)难a(bǔ)充，其建立了獨一無二的通道包層拓?fù)洹? 百通PoE距離擴展器全面滿足IEEE 802.3x全/半部分以太網標準。此產品可立即買到，可水平安裝也可墻體安裝。 更多關于百通PoE距離擴展器，請登錄：www.belden.com [font=times]original text [/font] [font=times][color=#708090][b]NEW BELDEN® POWER OVER ETHERNET RANGE EXTENDER DOUBLES TRANSMISSION RANGE OVER WIRELESS LANS [/b][/color][/font] [font=times][color=#708090]RICHMOND, IN – Belden, a world leader in the development of signal transmission solutions for wired and wireless enterprise networks, as well as broadcast/entertainment, industrial, building management and residential markets, announces the introduction of the Belden BWRE-100 Power over Ethernet （PoE） Range Extender for use in wireless LANs （WLANs）. Designed for in-line installation and seamless integration, the new PoE Range Extender significantly increases transmission distance, while offering users cost-effective design, optimal mobility, and ease of implementation. When used with the Belden Wireless Solution, the PoE Range Extender injects a re-energized signal between the Wireless Switch and the Access Point （AP）, using bi-directional input and output ports on the Extender. This enables users to install the APs at a distance of up to 200 meters from the Wireless Switch using Belden Category 5e, Cat 6 or 10G cable – effectively doubling the range of PoE transmissions from the baseline of 100 meters. The product can also be used as a standalone PoE device to extend the transmission distance from a system’s PoE injector or power supply to a standard PoE device without the use of an external power feed. The new Belden PoE Range Extender aptly complements the Belden Wireless Solution, which is built on a unique Channel Blanket topology. The Belden PoE Range Extender fully meets the IEEE 802.3x full/half duplex Ethernet standard. The product is available immediately, with installation options including horizontal shelf or vertical wall mount. For more information about the Belden PoE Range Extender, please visit the Web site: www.belden.com. [/color][/font]