產品頻道

The SST DeviceNet Pro PCI interface card connects your PCI bus computer to DeviceNet. The Pro Card is a high-performance version of the SST DeviceNet ISA card and is compatible with all applications written for the SST DeviceNet ISA card. Applications Many third party software programs support the SST DeviceNet interface card for various applications including: Operator Interface and MMI PC Control Network Configuration, Troubleshooting and Diagnostics I/O Emulation Device Development Features Entire DeviceNet Protocol is executed in hardware UCMMcapable, Group 1, 2, and 3 dynamic explicit connections supported Simultaneous execution of Group 2 Client and Server operation All DeviceNet standard baud rates supported: 125, 250, and 500 Kbaud Full DeviceNet implementation with Change of State and explicit messaging DeviceNet compliance at the card level for I/O scanner and device applications CustomDriver Development SST offers two options for supporting the DeviceNet interface card: SST Common Driver Architecture （CDA） or Memory Mapped Access. The SST CDA significantly reduces software driver development time without compromising any of SST hardware specific features. The CDA supports SST ControlNet, DeviceNet, Modicon and Profibus interface cards. Memory Mapped Access is also available. SST provides an open documented memory map interface with example drivers. Available with the SST DeviceNet Pro PCI Card DeviceNet Network Analyzer and Monitor Diagnostic Software Tools DeviceNet Node Commissioning Tool OPC Server Common Driver Architecture （CDA） Custom driver development software Microsoft Windows 95/98/NT drivers/DLLs Global technical support （24 hours/7 days） drivers. Hardware Specifications 32 bit, half-length interface card, surface-mount technology PCI Card PCI Specification 2.1 Compliant 256 Kbytes shared RAM（16 Kbytes host interface window） High performance 40 MHz processor with 512 Kbytes RAM, 512 Kbytes Flash Standard PCI interrupts supported DeviceNet compatible 5-pin DeviceNet connector DeviceNet compatible network status bicolor indicator Plug and play drivers included Compatible with CAN specification 2.0 part A Supports CAN data rates up to 1 Mbaud Supports all standard DeviceNet data rates: 125, 250, and 500 Kbaud Multiple cards can be configured in the same computer 500 V optically isolated CAN interface Operational temperature: 0 to 50 C Storage temperature: -25 to 70C Power requirements: +5 V +/- 5%400 mA （typical） Connection to non-powered （3 wire） CAN networks with external 12-24 VDC Other Reference Materials Web Site: www.mysst.com/cards/devicenet/dn.asp Affiliations SST is a member of the ODVA （Open DeviceNet Vendor Association） Data Sheets DeviceNet Diagnostic and Configuration Software DeviceNet OPC Server Third Party Driver List Certifications DeviceNet Conformance Tested Ordering Information: 5136-DNP-PCI